34
NOTE
Compare the local electric power supply with the connection values of
the device. Should the connection values not match, please contact
[email protected] or phone +49 8432-9489-0.
NOTE
The time required for a complete charging of the powerpack is
approx. 2,5 hours.
NOTE
In order to ensure the longevity of the power pack you must charge the po-
wer pack to full capacity before using the video light for the first time. Use
the power pack until it is completely discharged. Then recharge the power
pack to full capacity. Repeat these steps about 2 times.
Battery status indicator
Battery status
Battery power indicator
Flash power (1/1)
> 25 %
No symbol in the display
ca. 100-400 x
7-25 %
Display
ca. 30-100 x
< 7 %
flashes
Ca. < 30 x
7. Operating the device
7.1 Adjusting the height
• Loosen the fastening screw for height adjustment.
• Adjust the desired height.
• Tighten the fastening screw for height adjustment.
7.2 Function with radio remote trigger
• Plug your receiver (optional) with USB interface into the socket for the
radio remote trigger.
• Plug the trigger on your camera shoe.
Summary of Contents for ringflash hs 400
