14
7.3
Switch on powerpack and studio flash/adjust the output/switch off
The studio flash and the powerpack can be switched on and off through
the On/Off tappet switch.
1.
Switch on powerpack and studio flash:
Set On/Off tappet switch on I.
The modeling lamp lights up. You can trigger the studio flash through
the test button or photo cell.
2.
Adjust the output:
You can adjust the output of the powerpack through the stepless
output knob.
3.
Switch off powerpack and studio flash:
Set On/Off tappet switch on O.
The modeling lamp goes out.
8.
Transportation and storage
1.
Switch off device.
See
Switch the device on and off
.
2.
Let the device cool down completely.
WARNING!
Danger of burning through hot parts. Let the device cool
down completely.
3.
Demount reflector
4.
Put the protection cap over the lamp and fix it.
5.
Unplug the power cord and the connection cord from the device.
