11
Fluorescent Light 220 W
Cleaning
Housing
Use a microfiber cloth to remove light and stubborn dirt
Lamps
Wipe off with dust brush or dry, soft cloth
ADVICE:
Don´t clean the lamps with water. Even small residues on the
lamps could lead to bursting
10.3
Change lamps
WARNING
Please just use lamps, which are conform with the required specifications.
See
Technical Specifications
.
Screw lamps out and in.
See
Screw lamps in and out
.
10.4
Change micro-fuse
WARNING
Danger of electric shock and fire through short-circuit
A micro-fuse, which is not conform with the required specifications, doesn´t protect against the
overloading of the device.
Please just use a micro-fuse, which is conform with the required specifications. See
Technical
Specifications
.
Switch off device.
See
Switch on and off of the device
.
Disconnect from power supply:
Unplug power cord.
Open fuse holder:
Use a small screwdriver to lift up the fuse holder carefully and slightly.
Pull out the fuse holder with your hands completely out of the slot.
Take out the old micro-fuse.
Slide the new micro-fuse in the center of the holder.
Slide the fuse holder carefully into the slot as far as it goes.
11.
Accessories and options
You can find extensive accessories for your device in our webshop.
12.
Spare parts
Part of the device
Item number
Lamp (walimex Replacement Lamp Fluorescent Light) 2G11 / 55W
14532
Power Cord
12914
