22
23
•
When using several lamps at the same time with cable remote control:
Use the RJ45 cable to connect the individual lamps. On one lamp use the
RJ45 socket to connect the remote control.
• Plug the mains cable of the device into the DC socket on the device, then
connect the mains cable of the power supply unit with the outlet socket of
the electric power supply.
NOTE
Compare the local electric power supply with the connection values of
the device. Should the connection values not match, please contact
NOTE
After use disconnect the device from the local power supply by simply
pulling out the mains plug.
6. Operating the device
• Switch on the lamp on with the On/Off switch on the device.
• Adjust the desired light intensity with the brightness dimmer control.
• Adjust the desired colour temperature with the controller.
(depending on model type)
• After use operate the On/Off switch to switch off the lamp.
7. Troubleshooting
Problem
Possible cause
Remedy
The device is switched
on, but does not show
any function.
Power cord is not
plugged or plugged
incorrect
Plug in the power cord
correctly
The illuminant does
not light
The device is switched
off
Switch on the device
The device has not
enough power
Increase the power of
the dimmer control
The device is defective Repairs must only be
carried out by a skilled
electrician
Summary of Contents for Sirius 160B-LED
Page 24: ...46 47...
Page 25: ...48 49...
