background image

32

33

 

Recommendations for using your battery.

• Change the battery, at the latest, when the light starts to fl icker

• Switch the device off before removing the battery.
• This also applies for changing or adding another battery in models with several 

battery mounts. Switch the light off before adding or changing the battery, and do 

not insert other batteries into the mount while the light is being used.
• Do not let the battery charge level go too low, and charge up your battery as 

soon as possible. This ensures the longer battery life.
• Please remove the battery from the battery mount while transporting or storing 

the device. This is to prevent damage to the battery mounts during transportation 

and prevents the battery becoming uncharged unintentionally.
• To maintain the performance of your battery, we recommend letting the battery 

run down completely and then recharging it around once a month. 
• Please remove the battery from its mount after using your device

7.2  Power supply via power adapter - power adapter connection

The model Niova 300 generally includes a power adapter. This light can also be 

used as a light panel/ continuous light. The model Niova 150 is available with a ver-

sion with and a version without power adapter. Usually this light is used on battery 

power. Notes on matching accessories and batteries can be found in section 12 of 

this manual.
•  Plug the round DC power adapter plug into the power adapter connection so-

cket (5) of the light housing and connect the plug of the power supply unit into 

the socket of your local power supply (AC 100-240V/50-60 Hz)

•  The device is ready for mains power operation

 WARNING

Precautions when using with rechargeable battery

These can run out or explode, if inappropriately handled. Please observe the follo-

wing safety notes when handling the rechargeable battery for use with this unit:

 

Use only rechargeable batteries mentioned in these operating instructions.

 

Do not lay the rechargeable battery into fire or expose these to direct heat.

 

To prevent the product from being damaged make sure you have removed the 

rechargeable battery if you will not use the product over a longer period of time 

or if the rechargeable battery has been discharged.

 

If battery fluid has come into contact with skin or clothes, flush it off immediately 

with fresh water.

 

Do not recharge the rechargeable battery unattended.

 

Once the reacharging process is finished, disconnect the charger from the 

power supply.

 

NOTE

Only use batteries intended for the device – see technical specifications. After 

use remove the batteries from the battery compartment. 

 

NOTE

Compare the local electric power supply with the connection values of the  

device. Should the connection values not match, please contact [email protected].

 

NOTE

Only connect the power supply unit to an earthed plug.

 

NOTE

After use, disconnect the device from the local power supply by simple pulling 

out the mains plug.

Summary of Contents for Niova 150 Bi Color






















Reviews: