50
Manual 23091 LED Niova 100-F Pro 100W Bi Color
21.4
Integrating the devcie into a DMX network
With the help of the DMX cable (31) supplied, the luminaire can be
integrated into a DMX universe and controlled remotely via a
controller. On the luminaire you will find the DMX input socket (26)
of the RJ45 type. The adjacent output socket (27) can be used to
connect further DMX devices in a daisy chain.
1.
Plug the supplied 3-PIN DMX cable (31) (or a compatible DMX
cable) into the 3-PIN output connector of a suitable DMX
remote control console (not included).
2.
Plug the other end of the connection cable (RJ45) into the
DMX input socket (26) of the fixture marked [DMX IN].
3.
Press the control mode button (23) once or repeatedly to
switch between DMX control and remote/manual [2.4G/DMX]
control.
4.
When the DMX control mode LED [DMX] (16) lights up, DMX
control is activated.
5.
The selected DMX channel is shown in the fixture display if a
DMX control unit is connected by cable. If no DMX equipment
is connected, the status indication "OF" appears in the
display.
6.
Use the rotary knob (20) to set the desired DMX channel. You
can set channels from 1 to 512.
