17
16
1.2 Identifications in these instructions for use
Identification
Meaning
Draws your attention to the dealing with and the effect
of safety information.
WARNING
Draws you attention to a dangerous situation, which
can result in
severe
or even
fatal
injury, if not avoided.
CAUTION
Indicates a hazardous situation, which, if not avoided,
may result in
minor
or
moderate
injury.
NOTE
Draws your attention to possible material damage and
other important information in connection with your
equipment.
2. Important safety information
WARNING
Danger of blinding and eye damage
The optical radiation of the LED lamp can blind the eyes and cause after-
vision, if humans or animals look directly at the light source. This can lead
to accidents and eye damage.
Make sure that humans or animals do not look directly into the illuminant
and keep a safe distance of at least 2 mm. If necessary use diffusers
between lamp and model or object. Do not use the lamp for illumination
purposes when shooting small children or babies.
WARNING
Danger of electric shock, fire through short-circuit
A short-circuit could be caused through defect cables and through humidity
or moisture. A short-circuit can warm up the conductors, so that their
insulation or the conductors themselves might melt.. This could lead to fire.
■
Please just use the original cables, which are included in delivery. They
are engineered for your device and guarantee the necessary safety for
you and your device.
■
Don´t operate the device with wet hands or feet.
■
Operate the device only in dry rooms.
■
Don´t operate the device outdoors.
■
Please only follow this instruction manual for cleaning your device.
■
Make sure that cables and conductors aren‘t damaged. Damages could
be caused through heat impact, chemical influence or through mechani-
cal impacts as rubbing, bending, tearing, toppling or nibbling animals.
■
Prevent your device from tumbling. In case of tumbling please let an
electrician check the device before switching on again.
■
If your device could be damaged or if you notice a burning smell:
Disconnect the power supply by pulling out the power cord. Don´t open
the device. Never repair the device on your own. The device should
only be repaired by electricians.
■
Please follow this instruction manual for maintaining your device.
■
Please just use spare parts which are conform to the required
specifications.
■
Illuminants must only be replaced by a skilled electrician
WARNING
Danger of cutting and splintering caused by bursting illuminant.
Illuminants can break or splinter when banging against the device. Splin-
ters can cause eye and skin injuries.
■
Handle illuminants with care, to avoid breakage.
■
Make sure you do not touch the illuminant by accident when mounting or
replacing accessories.
