6
Step 3
Mark the position of the hole on your mounting surface. Drill
a 3/8"(10mm) diameter hole at the marked position through
the mounting surface. Insert the assembled Bolt
H
through
the desk hole,
guide the Support Plate
I
and Nut
G
through the Bolt
H
, rotate the Nut
G
clockwise to fasten
for stability.
A
Put the assembled TV/Monitor onto the Arm
A
and ensure the stability, tighten the VESA plate using Top Screw.
Step 4
Press the Arm
A
on horizontal level as image shown, adjust gas spring tension to your personal preference using Allen
Key 5mm
K
, adjust the tilt tension using Allen Key 5mm
K
.
A
K
K
For Heavier Monitors
For Lighter Monitors
Summary of Contents for GSMP001W
Page 2: ...2 ...