You may need others help to
lift the TV on the bracket.
Installation in the wooden wall
Installation in the concrete wall
Assemble the Panel and Panel extensions
1
：
Remove the pre-installed screws on the 2 Panel
extensions, and insert into the Panel as the picture shows.
2
：
Fix the panel and panel extension
by the screw removed in step 1,
shown as the picture.
Pre-installation
preparation
3
：
Hang the panel on the bracket and
fixed by the pre-installed screws and washers.
Install the Bracket
Install the hook and Panel
1
：
Place the hook on
the panel with the TV
2
：
Fix the screw under the hook with screwdriver
3
：
Arrange the cable management with extra tie
IMPORTANT SAFETY INFORMATION:
WARNING: Install and operate this device with care. Please read this instruction before beginning
the installation, and carefully follow all instructions contained herein. Use proper safety equipment
during installation. We hereby disclaims any and all liability for injury or damage arising from incorrect
assembly, incorrect mounting, or incorrect use of this product.
Please call a qualified installation contractor for help if you don't understand these directions or
about the safety of the installation.
have any doubts
If the product or accessory is damaged or missing, do not assemble or install. If you need to replace
anything else, contact us via Email:[email protected].
parts or
This product is suitable for 37-70'' LCD, plasma screen. The load-bearing of it is 132lbs/60kg
Do not use this product of any purpose or in any configuration not explicitly specified in this
instruction.
[Maintenance Instruction]
Please check the screws once every two months whether they are fixed or not.
Can adjust the angle
A
C B
C B
!
Rotate this nut to adjust
front and rear
Screw Package 1
Screw Package 1
