16
APPLYING THE CUFF
1. Remove all watches, wrist jewelry, etc. prior to attaching
the wrist monitor. Clothing sleeves should be rolled up
and the cuff should be wrapped around bare skin for
correct measurements.
2. Apply cuff to left wrist with
palm facing up as shown in
Fig. A.
3. Make sure the edge
of the cuff is about
1/4”~1/2” (1 cm) from the
palm as shown in
Fig. B.
15
Fig. A
Fig. B
SETTING USER PREFERENCES
1. To adjust the user preferences, press the
Date/Time Set
button
located on the top of the monitor.
2. The display will show a blinking ON. By default, the wrist
positioning guide is ON. To turn it OFF, press the
button.
3. Press the
Date/Time Set button
again for the display to
show a blinking number, showing the HOUR. Change the
hour by pressing the
button. Each press will increase
the number by one in a cycling manner. Pressing the
Date/
Time Set button
will confirm the entry.
4. Change the MINUTE, MONTH, DAY and YEAR as described
in Step 3 above, using the
button to change the numbers
and the
Date/Time Set button
to confirm the entries.
Press the button
turn 3d OFF
blinking 3d ON
confirm entry
blinking HOUR
repeat process to set HOUR, MINUTE,
MONTH, DAY and YEAR
PM
AVG.
3
UP
DOWN
ROTATE
RIGHT
LEFT
Summary of Contents for Deluxe Wrist WGNBPW-720
Page 41: ...IB WGNBPW720A ...
