7.3 Controller
If the <MIDI Control> parameter is set to Ctr, then all changes to
the program are sent as Controller messages. When these
messages are received, the appropriate parameters are changed.
This feature lets you record all changes to a sequencer (refer to
Chapter 9, “Controller Numbers”). If the <MIDI Control> parameter
is set to CtS, then the siganl envelope is sent as a Breath
Controller. The Modulation Wheel Controller, Breath Controller
and Foot Controller are available for use as modulation sources.
7.4 Pitch Bend, Aftertouch
These are also available for use as modulation sources.
7.5 Sending System Exclusive Data
Press and hold the <Shift> key and simultaneously press the
<Mode> key to activate the dump function. Once you have
pressed <Shift-Mode>, you can use the <Up> and <Down> keys to
select the type of System Exclusive message you want to send.
PrG - Program Dump - sends the current program.
ALL - All Dump - sends a backup of all program data and global
parameters.
Press <Shift-Mode> again to start the SysEx transfer. Chapter 8
describes the dump format in detail.
E25