9
SPECIFICATIONS
7
Tips & Tricks
•
Use a loop or other rythmnic source and connect the
RMS/Peak
output
with a filter or gate input. The detector signal works like an envelope
follower.
•
Connect a steady tone to the
Main
input and feed a drumloop for exam-
ple to the
Side
input. Now the steady tone should be modulated by the
rhythmic source depending on your
Balance
level.
8
Troubleshooting
8.1
Modules Power Fail
•
Check the orientation of the pin headers on your modules
•
Check if the total power consumption of your modules does not exceed
the specifications of your case/frame power supply
9
Specifications
Power Supply:
+12V/110mA, -12V/100mA
Width:
20HP, 101.6mm
Height:
3U, 133.3mm
Depth:
25mm
Total Weight:
350g
Technical specifications and design are subject to change without notice.
10
