21
Connecting
ENG
X
Remove 8 mm of insulation from both
wires.
X
Pass the cable through the cable
gland
B
D
E
Fig. 4: Pin assignment.
X
Unscrew both screws
E
of the plug
D
,
X
Connect the cable to the plug.
X
Tighten both screws.
X
Clean the seal
A
.
G
F
H
Fig. 5: Mounting profile and plug.
X
Pull the mounting profile
F
somewhat
out of the luminaire, see Fig. 5.
X
Insert plug
D
into plug
G
.
I
Fig. 6: Position of mounting profile and lugs.
NOTE:
Make sure that the lugs
I
of the
side part rest on the rail
H
of the mount-
ing profile, see Fig. 6.
X
Place the side part on the luminaire.
X
Tighten the three screws of the side
part evenly until seal
A
makes contact
with inside pipe all around on a width
of at least 2 mm.
X
Tighten the cable screw connection.