26
For your safety
ENG
1. For your safety
The luminaire has been designed in
accordance with state-of-the-art standards,
manufactured with utmost care using high-
quality materials, and tested.
Nevertheless, its use may constitute a risk
to persons or cause material damage.
X
Read all enclosed instructions and infor-
mation.
X
Please observe the warnings included
in the documentation and attached to
the unit.
X
The device must only be used in tech-
nically perfect condition, and only by
persons being aware of the risks and
dangers involved in operating the
device.
X
Keep this document available near the
device.
1.1 Designated use
The light is used for indoor lighting of rooms
and work areas.
1.2 Safety instructions
Explosion hazard
Operating the luminaire in rooms subject
to explosion hazards can trigger an explo-
sion and result in serious injuries or death.
X
Do not
operate the luminaire in rooms
subject to explosion hazards.
Danger due to electric current
Improper use and faulty work on the lumi-
naire may result in injuries and material
damage.
X
Have work at the luminaire such as
mounting, repair and dismounting per-
formed only by a skilled electrician.
X
Compare the mains voltage with the
nominal voltage and the frequency spe-
cified on the rating plate and make sure
that they are identical.
X
Connect the luminaire to the power sup-
ply only when the luminaire has been
completely assembled.
X
The light must be connected to a mains
supply with protective earth conductor.
X
Disconnect a damaged connecting
cable immediately from the power sup-
ply and have it replaced by the manufac-
turer or by a skilled electrician.
X
Before performing work on the lumi-
naire, disconnect the luminaire from
the power supply.
Mounting the light in a stable position
A toppling light can result in personal inju-
ries and material damage.
X
Mount the luminaire in horizontal posi-
tion.
X
Mount the device with two persons.
X
Mount the light in a stable position.
Hazard caused by unsuitable spare parts
Unsuitable spare parts can result in injuries
and material damage.
X
Use only spare parts approved by the
manufacturer.
Risk of corrosion
Operating the luminaire in moist rooms can
result in material damage.
X
Operate in dry rooms only.
