Waldmann LAVIGO DPS Series, Instructions For Use Manual

Page: 31 / 88

31
Mounting
ENG
X Guide the cable A (marked "right") on
the right and the cable F (marked "left")
on the left through the support tube.
X Plug the socket G into the plug C in the
support tube.
X Stow away all cables in the support tube.
Mounting the cover on the support tube
J
Fig. 4: Mounting the cover on the support
tube.
X
Press the cover
J
vertically on the
recess in the support tube, see Fig. 4.
3.3 Removing the cover from the
light head
NOTE: First mount one light head com-
pletely, before mounting the second light
head.
K
L
Fig. 5: Removing the cover.
X
Unscrew the screw K from the cover L ,
see Fig. 5.
X
Remove the cover from the light head.
X Remove the cover from the second
luminaire head.
3.4 Mounting the luminaire head |
TWIN-U
This chapter describes how to mount the
luminaire heads for the TWIN-U geometry.
Mounting and aligning the luminaire
head
NOTICE
Material damage due to damaging the
electrical cables on the luminaire head.
Damage to the luminaire.
X Do not
jam the cables.
M
N
O
Fig. 6: Mounting the luminaire head on the
support tube.
X
Guide the cables
M
from below through
the support arm O on the luminaire
head and insert the support arm com-
pletely into the support tube N , see
Fig. 6.