Seite/Page 11 / 14 / SAP-Dokument-Nr.: 10000155789 / 03.02.2022
The front of the device with the status-
LED should be aligned with the table’s edge.
bottom view top view
Adjust the shutter, facing the seating position.
High room temperatures might affect the detection sensitivity.
USB-connection
The device will be powered through its micro-USB connector. Please use the included cable to connect the
device with a USB power supply (5V, not included).
A multi-port USB power supply can support multiple devices at the same time, provided a sufficient power
per port (see also Technical Data).
Please keep in mind, that the cable does not block the sight of the sensor. Please also avoid to put tension
on the cable. Do not kink.
Initial commissioning Wi-Fi
After power-up the status-LED will show pulsating purple.
As no configuration data is present, the device automatically switches to the configuration
mode. The status-LED will blink three times.
While the device prepares for configuration, the status-LED will pulsate orange. Please hold on.
When the device is ready for receiving its configuration data, the status-LED will show static
orange.
On your mobile device, please go to the LVE App.
Enter your configuration data.
Wi-Fi: SSID, Password
MQTT: Account, Password
Che
kov
3
