500.0043-A
2
Subject to technical changes
3.
Connect the 9V ALKALINE block
battery to the cable located in the
housing of the input unit, and insert
the battery into the housing from the
front.
4.
5.
Fold the keypad back down until it
engages in the housing of the input
unit.
Insert the cable above the battery
into the housing.
6.
Enter the factory code (1-2-3-4-5-6)
and turn the keypad clockwise into
the end position.
7.
Open the door.
8.
Programme the new code as per
section 3.3.
Avoid jamming the cable!
