500.0001-D
5
Technical alterations reserved
5.
Completely unscrew the cylinder-head
screw located at the top-centre of the
side wall (4mm Allen key), holding the
side wall in place with your hand to
prevent it from tipping over. Then, allow
the side wall to tilt inwards and pull it out
of the plug connection in the base. As
soon as the side wall is separated from
the base, it can be pulled out of the safe
diagonally.
6.
Repeat Step 5 for the right-hand side
wall.
7.
Lift the base slightly and then pull it out
of the safe diagonally.
Make sure to hold
the rear wall in place with your hand!
8.
Allow the rear wall to tilt forwards from
the top and then turn it diagonally
forwards onto one side. Then, carefully
lift the rear wall and pull it out of the safe.
9.
Set the disassembled interior
construction to one side so that it does
not get in the way of anchoring the safe
and cannot be damaged.
