WALDIS CAWI BLUECAM Operating Instructions Manual Download Page 4

 

  Safe lock  

1.1.  General notes  

For your safety, you should change these factory codes immediately Make  

all code changes only when the safe is open and the lock is in the closed position. 

1.1.1.  Opening the lock  

The user factory code is 1-2-3-4 

 

The master factory code is 0-7-1-2-3-2 

 

Procedure 

1. When changing the user code/master code, the lock must first be opened with 

the respectively valid user code/master code 

2. Do not use personal data such as birthdays or phone numbers for your new 

codes 

3. If the lock is not closed or opened within 3 seconds after pressing the ON key, 

the electronics will switch off. Press the ON key again and repeat the process 

4. If the time period for entering a new code is exceeded, the electronics switch 

off. The old code remains valid 

5. Each correct key input during opening and closing is confirmed by a sound 

signal and a green flashing of the LED. These signals are not considered in 

the further instructions 

6. Never use force 

7. Never open the lock housing. Otherwise, you endanger the function of the lock 

and lose any warranty claims. 

1.1.2.  Open with the user code  

Press the ON key 

 

Press within 10 seconds and your 4-digit user code in 

10 seconds 

Turn the handle within 3 seconds. The lock is open 

 

 

If you have entered an incorrect user code, an acoustic signal is emitted several 

times and the LED lights up red. After the LED goes out, press the ON key and 

start entering the code again. 

 
 

Summary of Contents for CAWI BLUECAM












Reviews: