Waldbeck Huygens, Quick Start Manual

Page: 84 / 148

84
EN
Mount assembled outdoor sensor package
Before you mount:
Before proceeding with the outdoor mounting detailed in this section, you
may want to skip to setup instructions in section 6.2 and onwards first, while
you keep the assembled outdoor sensor package nearby (although preferably
not closer than 5 ft. from the console). This will make any troubleshooting and
adjustments easier and avoids any distance or interference related issues from
the setup. After setup is complete and everything is working, return here for
outdoor mounting. If issues show up after outdoor mounting they are almost
certainly related to distance, obstacles etc.
Mounting:
You can attach a pipe to a permanent structure and then attach the sensor
package to it (see Figure 9). The U-Bolts will accommodate a pipe diameter of
1-2 inches (pipe not included).
9 10
Finally, place the sensor package on top of the prepared mounting pipe.The
U-Bolts should be loose enough to allow this but loosen the nuts as necessary.
Once placed, hand tightens all four nuts, taking care to do so evenly.