Placing in Service
Maintencance
Cleaning the pump
•
Clean the filter housing and filter sponge monthly, or if the pump capacity is reduced.
• Also clean the pump in the case of frequent us.
1. Unplug the power.
2. Dismantle the fountain subassembly.
3.
Dismantle the filter housing.
4.
Clean the pump and filter sponge with a soft brush under flowing water.
5. Remove any grime in the rotor through the openings.
Winter care
1. Take the pump out of the water. 2. Thoroughly clean the pump.
2. Check the pump for damage.
3. Store the pump in frost-free conditions. in a container with water if possible.
8
Notes
• Comply with the maximum permitted immersion depth (see the information on the model plate)
•
Do not place the pump directly in the pond floor mud; place the pump on a raised surface.
• Lay the power cord in a protected manner to exclude the possibility of damage.
• Connect the pump to the electrical circuit..
•
Achtung: Betreiben Sie die Pumpe nie ohne den Filterkorb (1). Der Filter schützt die Pumpe vor Verschmut-
zungen und Verstopfungen durch Bodensatz, Staub und Schmutz. Betreiben Sie die Pumpe nicht im Trockenen.
1. Connect the pump to the electrical circuit.
2.
The flow rate can be adjusted by the control valve, the pump will start work once plug in and stop once unplug.
