How to make high pressure washer ready for use
Safety Devices
The unloader valve can reduce pressure if it exceeds
pre-set values�
Locking device on trigger gun (see illustration at the
beginning of this manual): The trigger gun features a
locking device� When the knob is activated, the trigger
gun cannot be operated�
Thermal sensor
A thermal sensor protects the motor against overload-
ing� The machine will restart after a few minutes when
the thermal sensor has cooled�
1. Connection of garden hose
Screw the water inlet coupling (3) tight on to the water
inlet�
Note: The inlet filter (A) must always be
fitted in the water inlet pipe to filter out
sand, lime stone and other impurities as
these will damage the pump valves.
Caution: Failure to fit the filter will invali
-
date the guarantee.
Connect the garden hose with a standard quick cou-
pling�
2. Mounting of high pressure hose
Attach the high pressure hose to the trigger gun and
machine�
Detach the high pressure hose by pressing the pawl
(A) or button (B)�
Getting Started
1
A
A
B
20
