11
Functioning
Installation
This equipment can kill the harmful germ and algae in the aquarium and the pond which
offer the healthy environment to the fishes. When the water under the irradiation of
wavelength in 253.7 nm ultraviolet radiation in a short period,the germ and pathogen in
the water will be killed then.
1. This equipment is not sold with the pump, please buy it yourself. Please connect the
inlet pipe with the outlet of the water pump.
2.
Please connect the outlet pipe with the other filter or the pond and fix it. After the
inspection of the pipe and connecting port, the water circulation can be started then.
3. Please check it when the water started circulation or not after several minutes.
4.
Turning on electrical source, makes the UV filter begin to work.
Installation
Pict. A: This device con only be worked under the protection of the cover. It should be
placed in some where that water will not submerge it, and it should be installed 2
meters away from water .
Connection
Pict. B: We would suggest choosing a hose that can have pressure of 1 bar. Cut off the
multi-stage hosetail according to the diameter of the hose.
Pict. C:
Connect the multi-stage hose tail to the inlet or outlet and fix with hose clip.
Pict. D: Put 0-ring into the screw and connect to the device.
Pict. E: You can change the two inlet checking windows to the water supply hose if neces-
sary.
Summary of Contents for 10030601
Page 1: ...10030601 Teichkl rer...
