www.wahsega.com
Page 20
WAN
Connection Type
Dynamic IP
–
Choose this to use DHCP to assign an address
automatically. Note that when using DHCP, you will have to
determine the IP address assigned to the speaker using your
DHCP server or through some other method in order to
access the configuration webpages in the future.
Static IP
–
Choose this to enter IP address settings
manually.
Warning: If you enter a configuration that is not accessible
from your network, you may be unable to communicate with
the speaker! Double-check that the settings you enter are
correct before rebooting the speaker to apply them.
Additional Settings (advanced)
Enable IGMPv3
–
Check to enable IGMP version 3 on your
speaker. If unchecked, IGMP version 2 (IGMPv2) will be used.
Default setting is
disabled
. If you know that your routers have
IGMPv3 enabled, you can safely enable this setting.
If unsure, leave
disabled
to ensure support with routers that only use IGMPv2.
MTU size
–
Maximum transmission unit allowed on the Ethernet
connection. The standard for Ethernet networks is 1500, and you
should not change this value
unless directed by your network
administrator.
STUN
Server/Port
–
Enter your STUN server here if applicable. STUN
servers may be required to operate with a public SIP server from
behind a NAT or router.
