Wahoo KICKR BIKE SHIFT, Owner'S Manual And Assembly Instructions

Page: 4 / 143

4
BEFORE EACH RIDE
• Check to ensure that stem bolts are tight and that handlebars cannot rotate.
• Confirm that your saddle is properly installed and all bolts are properly tightened.
• Ensure that both the levers for adjusting reach and setback are fully closed.
• Check that the seatpost and steer tube quick release clamps are tightened
and fully closed.
• Ensure that the standover height pin is properly seated and resting in the
corresponding height position hole and that the lever is fully closed.
• Ensure that your pedals are properly installed and adequately tightened.
• Refer to this manual for proper torque specs.
• Ensure that the KICKR BIKE SHIFT area is clear.
• Level the KICKR BIKE SHIFT’s feet and make sure the floor is clear of any debris.
• Check the power cord and brick for any damage before plugging it in.
MAINTENANCE AND STORAGE
It is important to follow the below maintenance tips to ensure optimal performance
of your KICKR BIKE SHIFT:
After each training session:
• Use a soft cloth to wipe the KICKR BIKE SHIFT dry or remove any sweat or water.
• Unplug the KICKR BIKE SHIFT when stored or plug into surge protector.
• Routinely check for signs of rust, corrosion, or excessive wear.
• Inspect all bolts and screws for rust or damage.
WARNING
ENGLISH