3.
Use the Pencil icon to make changes to your workout if required. e.g. Select to edit the
Audio Announcements.
4.
Select the green “Play” button to open a new workout.
5.
Activate the Wahoo RPM Cadence by shaking it for a few seconds or if attached to your
bike, spin the crank a few times.
6.
Make sure the Wahoo RPM Cadence is synced to your device. It will appear in the list of
Linked Sensors for that workout profile with an indication of signal strength shown on
the far right when it is connected to your device (button located in the top right corner).
7.
Select the green “Start” button to begin the workout. Information gathered from your
Wahoo RPM Cadence will now start to be displayed on your device.
NOTE: If a firmware update is available for your sensor, the Wahoo Fitness app will now
prompt you to proceed with performing an update using the Wahoo Utility app. Apply updates
when available to improve the performance of your sensor. The free Wahoo Utility app is
required to perform firmware updates and is available from the Google Play Store.
ENDING YOUR WORKOUT (Android):
1.
To end your workout, simply select the red “Pause” button.
2.
Select the red “Stop” button and either a) Discard b) Save or c) Cancel.
3.
If you elect to save & finish the workout, the Wahoo Fitness app will now display a
summary of your workout.
For more information: Please refer to the instructions page for the Wahoo Fitness app.
WANT TO CONNECT TO ANOTHER APP?
This product is compatible with a number of third party apps. However, each app connects to
sensors a little differently. As a general rule: Open the compatible app you would like to use and
find the settings. Look for "connect to sensor" or another similar option. You must connect each
sensor separately for each app you use.
NOTE: Bluetooth devices can only pair to one app at a time. Make sure to close any background
apps that may be using the sensor before connecting to a new app.
