Setup
This setup guide is intended to assist with installing your Wahoo RPM SPEED sensor on your
bike and pairing to the Wahoo Fitness app.
How to install the Wahoo RPM SPEED on your bike:
1.
Slide the Wahoo RPM SPEED pod into the mount supplied. Make sure the Wahoo logo
is facing outwards on the flush side of the housing and the back of the Wahoo RPM
SPEED faces toward the hook side of the mount. The hooks should be facing downward.
2.
Slide the rubber shim-strap into the back (the hooked) side of the mount so that the three
prongs of the strap fit snugly up against the top two hooks of the housing. The Wahoo
RPM SPEED is now ready to fit to the hub of either wheel as per your preference.
3.
While holding the mount in place on your selected hub, gently stretch the strap portion of
the rubber shim-strap around the hub and secure using the bottom two hooks on the
mount. When installed correctly, the Wahoo RPM SPEED should not be in contact with
any other parts of your bike.
Your Wahoo RPM SPEED is now ready to be paired with the Wahoo Fitness app.
How to Pair your Wahoo RPM SPEED Sensor to the Wahoo
Fitness app (iOS):
1.
Download the Wahoo Fitness app from the App Store.
2.
Open the Wahoo Fitness app. Make sure you have Bluetooth turned on.
3.
Activate the Wahoo RPM SPEED by shaking it for a few seconds or if attached to your
bike, spin the wheel a few times.
4.
Select “Sensors” in the bottom left corner.
5.
Select “Add New Sensor”.
6.
Choose your Wahoo RPM SPEED from the list of available sensors.*
7.
Once certain you are connected to the correct sensor, select “Save Sensor”.
8.
Choose the workout profiles you would like your Wahoo RPM SPEED to be active for
(ex. Cycling & Indoor Bike Trainer).
9.
Select “Done” to complete the pairing & workout selection process.
10.
Select “Done” in the top left hand corner to exit the Sensors menu.
How to Pair your Wahoo RPM SPEED Sensor to the Wahoo
Fitness app (Android):
1.
Download the Wahoo Fitness app from the Google Play Store.
2.
Open the Wahoo Fitness app. Make sure you have Bluetooth turned on.
3.
Activate the Wahoo RPM SPEED by shaking it for a few seconds or if attached to your
bike, spin the wheel a few times.
