GymConnect Retrofit Installation and Programming guide
Version 0.8
Wahoo Fitness
4
90 West Wieuca Road, Suite 110
Atlanta, GA 30342
www.wahoofitness.com
1-877-978-1112
Installation
1.
Locate the CSAFE port on the fitness
equipment. Typical locations include the back
of the console or near the power cord. Refer
to the equipment user manual or
manufacturer support resources for guidance
on CSAFE port location if you are not able to
readily locate it.
2.
On fitness equipment use a cleaning solution such as rubbing
alcohol to clean the area where you would like to attach the
GymConnect retrofit module. After cleaning wipe the area dry.
Then, clean the bottom of retrofit module and wipe dry and affix
the yellow side of the double-sided tape to the bottom of the
GymConnect retrofit module.
3.
Remove the red side off the double
sided tape and attach the
GymConnect retrofit module to the
fitness equipment device. After
securely affixed to the machine,
connect the Ethernet cable between
the retrofit module and the CSAFE port.
