239.805.001
15
Date: 2020-03-11
Figure 1: Illustration of application of the soft-limits.
Positioning
When the Medium Roll Down has been setup and the top position is set, it is possible to use it for
positioning run.
The position is set on the DMX channel 1 and 2, which controls the rough-and fine-position. Where
100 % is the top-position and 0 % is the bottom-position.
The positions lamp indicates, by fast flashing, that the Medium Roll Down is going towards the
wanted position. The position lamp indicates, by stable light, that the Medium Roll Down has
found the wanted position and the motor has stopped.
The speed is set on the DMX channel 3, where 100 % is the fastest and 0 % is the slowest.
The Medium Roll Down does not run unless DMX channel 3 is set above zero, and therefore this
channel works as a main brake.