WAHLAP TECH STORM RIDER 2, Owner'S Manual

Page: 73 / 156

67
F. Safety Valve Check.
Frequently check the safety valve and see whether it is sensitive. The safety valve should be
able to release the air easily, and should be able to reset immediately by pressing the stem.
G. Magnetic Valve Check.
a) Check the magnetic valve and see whether the valve is loose or its wiring have any poor
contact.
b) Check the magnetic valve and see whether it is functional (turn on/off.) If the valve is
damaged, please replace it promptly.
H. Filter Check.
A dirty filter will be jammed during operation. In that case, malfunctions will occur due to
pressure drop.
a) Remove the filter from the air compressor.
b) Clean the dirt inside the filter, such as blow it away. If the dirt cannot be cleaned, please
replace the filter.
I. Cooling Fan and Surface Cleaning.
The machine should be cleaned regularly and see whether the power cord, air pipe,
connectors, etc. are damaged or aging. Especially the motor’s cooling fan, such
maintenance is helpful to heat dissipation and extend the air compressor’s service life.
J. Air Compressor Service Life.
Air compressor’s operation in an amusement machine is more frequent from other normal
application scenarios. Therefore, we strongly recommend you to replaced timely when
operated for more than 5,000 hours or 2 years. For more details, please contact our
company or the distributor.
E. Pressure Switch Check.
The pressure switch can adjust the on/off state of the air compressor, and let the air
compressor rest by adjusting the pressure in the air tank. Frequently be turned on and off for
a long period of time, oxidation and fatigue will happen to the contact points and air spring of
the pressure switch. This will cause poor contact and sparking. Therefore, the pressure switch
needs to be checked regularly.
a) Check the pressure switch’s contact points and see whether they are sparking or have any
poor contact. If it is damaged, please replace it promptly.
b) Check the pressure switch and see whether it will abnormally stop within the air pressure
set value. If it is abnormal, please replace it promptly.