12
CORDLESS CLIPPER
CARE AND CLEANING
• Always disconnect the appliance from the wall socket before any
cleaning operation.
• To clean the unit, use either a clean dry or dampened cloth. Do not
use abrasive cleaning agents or scrub pads. Do not use alcohol or
solvents.
• To remove hair from between the blades, use the cleaning brush
provided.
• The blades must be re-aligned if they have been removed for
cleaning or replacement on the 5 Star models(Fig. 7). No re-
alignment is required on the standard models. (Ref. 8591-830)
• After each use, blades should be cleaned and oiled. Put a small
drop of Wahl Clipper Oil between the blades while the trimmer is
running. Wipe off excess oil so it does not run into the motor. (Fig.4)
• Do not store the trimmer in a wet or moist environment.
• Never immerse the appliance in water or any other liquid.
DO NOT USE bleach, benzene or thinner to clean the unit.
WIRING
THIS PRODUCT MUST ONLY BE USED WITH THE
TRANSFORMER SUPPLIED. SHOULD A REPLACEMENT BE
REQUIRED CONTACT WAHL CUSTOMER SERVICES.