14
ULTIMA PLUS SHAVER
WET CLEANING
•Shaving head and cutting blades can be cleaned under warm,
running water (max 70 °C)
WET CLEANING WITH “LIFT & WASH” FUNCTION:
•Press the release buttons (11). The blade head frame will
automatically slide into “Lift &Wash” position (7).
•Hold the shaver head under warm, running water (no hotter
than 70 °C), in such a way that the water can run through the
opening (2).
•For increased cleaning effectiveness you can also use regular
liquid soap. Rinse thoroughly under warm, running water.
•Allow the shaver to dry completely before replacing the blade
head.
•After cleaning you should spread a drop of Wahl Clipper oil on
the cutting blades and the long hair trimmer to keep them in
good working order.
•Wipe the housing down with a soft, damp cloth.
•Hold the blade head on the sides and press it down until it
locks into place.
•Replace the protective cap (1) or trimmer cap (8).
NOTE: From time to time, place a few drops of Wahl Clipper
Oil onto the cutting blades and the trimmer attachment. Let the
device run for a couple of seconds to distribute the oil evenly.
Using a soft cloth, wipe off the excess oil, if necessary.
REPLACEMENT PARTS
Cutting elements are subject to natural wear and excluded from
the warranty. For optimal shaving, please replace your cutters
& foil regularly.
We recommend replacing shaving foils once a year and the
cutting blades every 12–18 months to ensure an optimal shave.
The replacement parts can be ordered from Wahl Customer
Services.
REPLACING PARTS
1.Take off the protective cap.
2.Press the release buttons of blade head and remove it.
