TM612
- 19 -
- 19 -
•
Enter the sensor information fields. Use the F1 function key (
) to move from one field to the next.
•
Confirm your choice using the
VAL
key.
•
To add a value in the table of calibration points, use the
keys, enter the calibration points (real
value and value read) then confirm using the
VAL
key.
•
Repeat this operation for all the calibration points (maximum of 4).
To delete a line, select it then use the
key.
TM612
- 20 -
To edit a line, select it then use the navigation key (
) to make editing possible.
•
Confirm using the
VAL
key to return to the measurement screen.
To ensure the measurements are made using the calibration coefficients defined earlier, go to the
Configuration/Function
menu.
•
In the
Probe
field, select sensor1 (SONDE1-SENSOR1 below).
Note: the Calibrated sensors are at the top of the list and their name is preceded by an *.
•
Confirm the latter using the
VAL
key.
The chosen calibrated sensor is displayed in the measurement screen.
D.4
Storage of acquisitions in progress.
The TM612 is designed to store 10,000 values in one or more acquisition bursts.
•
Using the F2 key, enter the Mode menu.
•
Select the
Memory
function.
•
Confirm using the
VAL
key.
Name of
calibrated sensor
used
