11
Deluxe Chrome Pro Clipper
For the top of the head you will give a fairly short cut if you use
the #8 (2.5cm length) attachment comb.
With the teeth flat against the head, slowly start trimming from
the front to the back. Again, it is better to leave the hair longer
the first few haircuts.
Longer hair on top: (no attachment comb). Use either the
enclosed barber comb, or a regular comb, and lift the hair on
the top of the head cutting over the comb, or grasp the hair
between the fingers from the front to the back of the head,
gradually cutting the hair shorter by reducing the space between
the comb or fingers and the head. Comb the clients hair frequently,
removing trimmed hair and checking for uneven strands.
OUTLINING
When outlining, no attachment combs are needed. On a multi-cut clipper,
push the lever up to the close-cut position. Comb hair into desired style,
then starting between the ear and the sideburns as shown, hold clipper
with corner edge of blade against the hair-line.
Slowly follow the desired outline of the hair over, around and behind
the ears. For defining sideburns and the back of the neck, hold the clipper
upside down, as shown, and hold against the skin at the desired length and
move down. Comb hair and check that sides are even. Check for uneven
spots throughout the haircut and amend if required.
SHORT TAPERED STYLES
If a short tapered cut on the sides and back is desired, follow this diagram:
INSTRUCTIONS FOR CUTTING MEN’S AND BOY’S HAIR
CREW CUTS AND SHORT CUTS
Starting with the desired attachment comb, cut from the back of the neck
to the crown. Hold the attachment comb flat against the head and slowly
move the clipper through the hair as shown.
