4
CHROMSTYLE CLIPPER INSTRUCTIONS
►
Do not attempt to replace the battery. Lithium ion batteries may explode, catch fire and/or cause burns if they are dismantled,
damaged or exposed to moisture and/or high temperatures.
►
Do not expose the appliance to temperatures below 0˚C and above +40˚C for any length of time. Avoid direct exposure to
sunlight.
Warning! Injuries due to incorrect handling
►
Switch off the appliance and unplug from outlet when not in use, before putting on or taking off attachments and also before
cleaning the appliance.
►
Never use your appliance without paying attention! Except when charging always unplug this appliance from the electricity outlet
immediately after using.
►
Exhausted batteries/ rechargeable batteries. should not be disposed of in the household waste. Dispose of them in a completely
discharged state in accordance with local legal regulations. Do not throw into fire where heat could cause them to rupture.
Caution! Danger of product damage
►
Do not wrap the cord around the appliance / charger.
►
Do not use outdoors or in damp areas.
►
Never carry the unit by its power cord.
►
Do not drop or insert any object into any opening.
PRODUCT DESCRIPTION
Description of parts (Fig. 1)
A
Blade set
B
On/off switch
C
Battery power indicator
D
Charging stand
E
Cutting-length adjustment
F
Appliance socket
G
Charging stand socket
H
Attachment comb, cutting length 3 mm
I
Attachment comb, cutting length 6 mm
J
Attachment comb, cutting length 9 mm
K
Attachment comb, cutting length 12 mm
L
Plug-in transformer
M
Appliance plug
N
Cleaning brush
O
Oil for blade set
TECHNICAL DATA
HAND-HELD APPLIANCE
Drive unit:
DC motor
Battery:
Li-ION battery (LiFePO4)
Battery operating time:
Up to 90 minutes
Dimensions (LxWxH):
178 x 46 x 50 mm
Weight:
Approx. 290 g
Emission sound pressure level: Max. 63 dB(A) @ 25 cm
Vibration:
< 2.5 m/s2
CHARGING STAND
Dimensions with accessories (LxWxH):
96 x 120 x 72 mm
Weight:
approx. 91 g
PLUG-IN TRANSFORMER
Type
Adapter 6000
Power consumption:
Max. 12 W
Operating voltage:
100 – 240 V / 50 – 60 Hz
The appliance is safety insulated and radio screened. It meets
the requirements of EU Electromagnetic Compatibility Directive
2004/108/EC and Machinery Directive 2006/42/EC.
OPERATING INSTRUCTIONS
Keep the packaging for safe storage or transport later.
Check that the contents are complete.
Check all the parts for possible transport damage.
CHARGING THE BATTERY
1.Connect the appliance plug (M) on the plug-in transformer to the charging stand socket (G) (Fig. 4a).
•The appliance can also be connected directly to the plug-in transformer for charging (Fig. 2a/b).
•Intelligent charge management prevents the battery from overcharging
2.Connect the plug-in transformer to the mains socket (Fig. 4b).
3.Switch off the appliance using the on/off switch (Fig. 3b).
4.Place appliance on the charging stand (Fig. 4) or connect directly to the plug-in transformer (Fig. 2a/b). A signal will sound and the charging process begins.
•Depending on the charge status, the corresponding segment of the battery power indicator will flash during the charging process. Once the battery is fully
charged, all segments of the battery power indicator will remain lit continuously.