Installation
• 11
Fieldbus Dependent I/O Module
INTERBUS
4 Installation
4.1 Mechanical Installation
4.1.1 Snapping on / Detaching the Base Module
The WAGO-I/O-SYSTEM 752 is intended for mounting on a TS35 type car-
rier rail. The base module snaps onto the carrier rail, as shown in Fig. 4-1.
Fig. 4-1: Snapping the base module onto the carrier rail
g1xxx08x
The module can be detached from the carrier rail by releasing the latch using a
suitable tool (screw driver), as shown in Fig. 4-2.
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48
17 18
25 26
WAGO-I/O-SYSTEM
752
INTERBUS
16
DI/16DO
ITEM-NO.
752-824
INPUT I
OUTPUT O
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16
33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48
0V
24V
T I
41 42 43 44 45 46 4
INTERBUS
READY
BA
OVERLOAD
PUSH
PUSH
WAGO-I/O-SYSTEM 752 16DI/16DO
752-324
RC
RD
INPUT
9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
INPUT
OUTPUT
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
Release clip
Fig. 4-2: Detachment of the I/O module from the carrier rail
g1x2411e
