WAGO-I/O-SYSTEM 750 XTR
Device Description 53
750-352/040-000 FC ETHERNET G3 XTR
Manual
Version 1.3.0
Pos: 39.1 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebeschrei bung (alte Str uktur)/Bedi enel emente/F eldbuskoppler/-controll er/Adresswahlschalter - Überschrift 3 @ 4\mod_1239190509819_21.docx @ 30420 @ 3 @ 1
4.4.2
Address Selection Switch
Pos: 39.2 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebeschrei bung (alte Str uktur)/Bedi enel emente/F eldbuskoppler/-controll er/DIP-Schalter-Bil d ( 8 ... 1 von oben nach unten) Bildunterschrift: Adresswahlschal ter @ 4\mod_1239180034696_21.docx @ 30364 @ @ 1
Figure 29: Address Selection Switch (for example setting “0“)
Pos: 39.3 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebeschrei bung (alte Str uktur)/Bedi enel emente/F eldbuskoppler/-controll er/Adresswahlschalter beschr eibung - Allgemein Gerät @ 4\mod_1239190682597_21.docx @ 30423 @ @ 1
Using the address selection switch, the device can be assigned a fixed IP
address.
The set value corresponds to the last digit of the IP address (host ID). The
complete IP address consists of the base IP address stored in the device (factory
setting: 192.168.1.0) and the host ID set on the address selection switch
The coding of the host ID is bit by bit and begins with address selection switch 1
for bit 0 (LSB) and ends with address selection switch 8 for bit 7 (MSB).
Example:
Basic IP address:
192.168.1.0
Address selection switch (1 … 8):
"11011001" = 155
IP address:
192.168.1.155
The detailed use of the address selection switch in conjunction with other options
for IP address assignment is described in the chapter "Commissioning".
Pos: 40 /D okumentation allgemei n/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
