manualshive.com logo in svg

WAGO WAGO-I/O-SYSTEM 750 750-481/003-000, Manual

Share
Download
WAGO WAGO-I/O-SYSTEM 750 750-481/003-000 Manual Download Page 10

10 

Important Notes 

WAGO-I/O-SYSTEM 750 

 

 

750-481/003-000 2AI RTD Ex i 

Appropriate housing (per 94/9/EG) is required when operating the WAGO-I/O-
SYSTEM 750 in hazardous environments. Please note that a prototype test 
certificate must be obtained that confirms the correct installation of the system in 
a housing or switch cabinet. 

Po

 

s: 14.6 /Alle Serien (Allgemeine Module)/Wichtige Erläuterungen/Technischer Zustand der Geräte @ 3\mod_1221060446109_21.doc @ 21723 @ 3 @ 1 

2.1.4 

Technical Condition of Specified Devices 

The components to be supplied Ex Works, are equipped with hardware and 
software configurations, which meet the individual application requirements. 
WAGO Kontakttechnik GmbH & Co. KG will be exempted from any liability in 
case of changes in hardware or software as well as to non-compliant usage of 
components. 

Please send your request for modified and new hardware or software 
configurations directly to WAGO Kontakttechnik GmbH & Co. KG. 

Po

 

s: 14.7 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @  @ 1 

 

Manual 

 

1.1.0  

Summary of Contents for WAGO-I/O-SYSTEM 750 750-481/003-000



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands