765-4501/0100-0000
Appendix
Product manual | Version: 1.1.0
129
8PORT IOL-A FLD EI DC 24V 2.0A
Changes or modifications made to this equipment not expressly approved by WAGO
Kontakttechnik GmbH & Co. KG may void the FCC authorization to operate this equip-
ment.
14.2 Operational Description
Product description
The product 0765-4501/0100-0000 is used to capture field signals on sensors, actuators
and hubs which have been sent or received by a higher-level controller and output them
via IO-Link.
Description of operation (FCC)
The product, a fieldbus module in the IP67 housing, serves the acquisition and output of
data via sensors and actuators for the industrial control technology. The integrated Blue-
tooth
®
interface of the product allows the parameterization, operation, diagnosis, and
monitoring using a mobile device and the WAGO App I/O Field.
The following figure shows the block diagram of the module.
Logic
Power
supply
(X31, X32)
I/O
ETHERNET
(X21)
ETHERNET
(X22)
Bluetooth (BT)
logic + antenna
Port (X01)
Port (X02)
...
Bluetooth
®
Transmitter
Table 97: Bluetooth
®
Transmitter
Technology used
Bluetooth
®
Low Energy
Modulation
GFSK
Data rate
1 Mbit/s
Work frequency
2402 ... 2480 MHz
Maximum power including tune up tolerance
Output power: +8 dBm
Tolerance: +2 dBm / –3 dBm
Antenna type
PCB monopole
Maximum antenna gain
1.25 dBi
