Touch Panel Standard Line
Commissioning 183
762-4xxx TP 600
Manual
Version 1.3.0
8.7.4.4.3 “MAC Address Filter State Xn” Group
Table 172: WBM “Configuration of MAC Address Filter” Page – “MAC Address Filter State Xn” Group
Parameters
Explanation
Filter enabled
Enable or disable here the MAC address filter for the
specific interface.
Click
[Submit]
to apply change. The change is effective immediately.
8.7.4.5 “MAC Address Filter Whitelist” Group
Table 173: WBM “Configuration of MAC Address Filter” Page – “MAC Address Filter Whitelist” Group
Parameters
Explanation
MAC address
Displays the MAC address of the relevant list entry.
MAC mask
This displays the MAC mask of the relevant list
entry.
Filter enabled
Enable or disable the filter for the relevant list entry
here.
…
MAC address
Enter here the MAC address for a new list entry.
You can enter 10 filters.
MAC mask
Enter the MAC mask for the new list entry here.
Filter enabled
Enable or disable the filter for the new list entry
here.
Click
[Submit]
to apply the change. The change is effective immediately.
Click the appropriate
[Delete]
button to remove an existing list entry. The change
is effective immediately.
Click
[Add]
to accept a new list entry. You can enter 10 filters. The change is
effective immediately.
8.7.4.5.1 “Configuration of User Filter” Page
8.7.4.5.2 “User Filter” Group
Table 174: WBM “Configuration of User Filter” Page – “User Filter” Group
Parameters
Explanation
Count
The number of configured user filters is displayed.
8.7.4.5.3 “User Filter n” Group
This group displays the filters added in the “Add new user filter” group. As long as
no filter has been added, the group is hidden.
