176 Commissioning
Touch Panel Standard Line
762-4xxx TP 600
Manual
Version 1.3.0
Table 163: WBM “Screensaver” Page – “Screensaver Settings” Group
Parameter
Explanation
Enabled
You can enable or disable the screensaver here.
Setting
Specify whether an image, the time, a text or a
backlight should be displayed or whether screen
care should be performed.
• Image: The screensaver with the WAGO logo is
activated after a time set under “Duration.”
• Text: Enter text here that is activated as the
screensaver after the time set under “Duration” has
elapsed.
• Time: The current time is displayed as the
screensaver.
• Backlight: The brightness is reduced to the
screensaver brightness and the WAGO logo
displayed.
• Screen care: For screen care, all pixels are
inverted for a few milliseconds (not visible).
• Off: No screensaver is displayed.
Text
Enter any text display as the text screensaver.
(Can be adjusted in the “Text” option.)
Duration (s)
When the display is not in use, the screensaver is
activated after the time set here has elapsed.
8.7.3.22 “Screen Care” Group
Set how long the display should be disabled for cleaning.
Table 164: WBM “Screensaver” Page – “Screen Care” Group
Parameter
Explanation
Enabled
You can enable or disable the screen care function
here.
Time (hh:mm:ss)
Enter the time at which screen care should be
performed.
(Can be adjusted in the “Screen care” option.)
8.7.3.22.1 “Users” Page
The settings for user administration are shown on this page.
8.7.3.23 “Change Passwords” Group
Note
Change passwords
The initial passwords as delivered are documented in this manual and
therefore do not provide sufficient protection. Change the passwords to
meet your particular needs!
