14
List of Figures
WAGO ETHERNET Accessories 852
852-0111 5 Port 100BASE-TX Industrial ECO Switch
Manual
Version 1.2.0, valid from FW/HW Version 01/06
2.3
Special Use Conditions for ETHERNET Devices
If not otherwise specified, ETHERNET devices are intended for use on local
networks. Please note the following when using ETHERNET devices in your
system:
•
Do not connect control components and control networks to an open
network such as the Internet or an office network. WAGO recommends
putting control components and control networks behind a firewall.
•
Limit physical and electronic access to all automation components to
authorized personnel only.
•
Change the default passwords before first use! This will reduce the risk of
unauthorized access to your system.
•
Regularly change the passwords used! This will reduce the risk of
unauthorized access to your system.
•
If remote access to control components and control networks is required,
use a Virtual Private Network (VPN).
•
Regularly perform threat analyses. You can check whether the measures
taken meet your security requirements.
•
Use “defense-in-depth” mechanisms in your system's security configuration
to restrict the access to and control of individual products and networks.
Summary of Contents for ETHERNET Accessories 852 852-0111
Page 36: ......
