WAGO Edge Computer Manual Download Page 6

Page: 6 / 52

Regulations

WAGO Edge Computer

752-9800

Manual

Version 1.0.0

1.4

Property rights

Third-party trademarks are used in this documentation. This section contains the

trademarks used. The “®” and “TM” symbols are omitted hereinafter.

•

Adobe

and Acrobat

are registered trademarks of Adobe Systems Inc.

•

Android

is a trademark of Google LLC.

•

Apple, the Apple logo, iPhone, iPad and iPod touch are registered

trademarks of Apple Inc. registered in the USA and other countries. “App

Store” is a service mark of Apple Inc.

•

AS-Interface

is a registered trademark of the AS-International Association

e.V.

•

BACnet

is a registered trademark of the American Society of Heating,

Refrigerating and Air Conditioning Engineers, Inc. (ASHRAE).

•

Bluetooth

is a registered trademark of Bluetooth SIG, Inc.

•

CiA

and CANopen

are registered trademarks of CAN in AUTOMATION –

International Users and Manufacturers Group e.V.

•

CODESYS is a registered trademark of CODESYS Development GmbH.

•

DALI is a registered trademark of the Digital Illumination Interface Alliance

(DiiA).

•

EtherCAT

is a registered trademark and patented technology licensed by

Beckhoff Automation GmbH, Germany.

•

ETHERNET/IP™ is a registered trademark of the Open DeviceNet Vendor

Association, Inc (ODVA).

•

EnOcean

is a registered trademark of EnOcean GmbH.

•

Google Play

is a registered trademark of Google Inc.

•

IO-Link is a registered trademark of PROFIBUS Nutzerorganisation e.V.

•

KNX

is a registered trademark of the KNX Association cvba.

•

Linux

is a registered trademark of Linus Torvalds.

•

LON

is a registered trademark of the Echelon Corporation.

•

Modbus

is a registered trademark of Schneider Electric, licensed for

Modbus Organization, Inc.

•

OPC UA is a registered trademark of the OPC Foundation.

Summary of Contents for Edge Computer





















































Search results

Summary of Contents for Edge Computer

Reviews:

Related manuals for Edge Computer

Brands by name

Popular brands

WAGO Edge Computer, Manual

Search results

Summary of Contents for Edge Computer

Reviews:

Related manuals for Edge Computer

Brands by name

Popular brands