852-1328
Configuration in the WBM
Product manual | Version: 1.2.0
79
Industrial Managed Switch
Figure 59: WBM “Maintenance” Page – “Firmware Upgrade” Tab
10.8.2 Reset to Default
When the switch is not working properly, the user can reset it back to the original factory
default setting by clicking on the
[Reset]
button as shown in Figure “WBM “Maintenance”
Page – “Reset to Default” Tab”. When the switch is restarted, the web browser will be re-
directed to the login web page as depicted in Figure “Login Web Page”. Note that there is
no physical reset button on the front panel of the box; therefore, the user will have to ei-
ther using the
[Reset]
button on this page.
Figure 60: WBM “Maintenance” Page – “Reset to Default” Tab
Figure 61: Login Web Page (Example)
