852-1328
Configuration in the WBM
Product manual | Version: 1.2.0
77
Industrial Managed Switch
10.7.1.3 RSTP Port Setup
Figure 58: WBM "Redundancy" tab – "RSTP Port Setup" page
Table 43: WBM "Redundancy" tab – "RSTP Port Setup" page
Parameter
Description
Port Range
Select the range of ports for which you want to apply the Port Parameters Settings.
Edge Port
Select if the Edge Port setting should be enabled or disabled on the selected port range.
RSTP per port
Select if RSTP should be enabled or disabled on the selected port range.
BDPU Filter
Select if the BDPU Filter setting should be enabled or disabled on the selected port
range.
BDPU Guard
Select if the BDPU Guard setting should be enabled or disabled on the selected port
range.
Root Guard
Select if the Root Guard setting should be enabled or disabled on the selected port
range.
10.7.1.4 RSTP Failover & Recovery Times
Industrial automation applications require robust communication networks that ensure
high availability. The availability of an Ethernet network is largely determined by how
quickly a network can recover from a cable or device failure.
There are several approaches to ensuring availability. The ring-based network topology is
the simplest and most widely used. However, not all solutions achieve the same system
availability and are directly dependent on the network topology. In order to make conclu-
