852-1328
Configuration in the WBM
Product manual | Version: 1.2.0
71
Industrial Managed Switch
This approach is quite simple, fast and easy to manage in that there are no complex
lookup tables required for VLAN segmentation. If the Port-to-VLAN connection is de-
signed with an application-specific integrated circuit (ASIC), performance is very good. An
ASIC allows Port-to-VLAN mapping at the hardware level.
Note
Creating VLANs
Up to 128 VLANs can be set up. It is recommended to configure a trunk port with tag and
have all ports join the VLAN.
Figure 54: WBM "Security" tab – "VLAN Setup" page
Table 39: WBM "Security" tab – "VLAN Setup" page
Parameter
Description
Role
Select whether that port should be assigned the Access or Trunk role.
VLAN
Select the VLAN to be assigned to the port (for trunk e.g. 1,3,6,19)
10.6.5.3 Management VLAN
There must always be a port in the Management VLAN. Otherwise, the switch cannot be
configured.
