20
Device Description
WAGO ETHERNET Accessories 852
852-1111 5 Port 1000BASE-T Industrial ECO Switch
Manual
Version 1.3.0, valid fromFW/HW Version 02/04
4.2
Connectors
4.2.1
Power Supply (PWR)
The female connector can easily be connected to the 3-pole male connector
located on the top of the ECO switch.
The male connector shows the following pin assignment:
Figure 3: Power supply (PWR) port
Table 5: Legend for “Power supply (PWR) port” figure
Pin
Description
Description
+
PWR
Primary DC input
-
PWR
Primary DC input
Y
GND
Ground potential (functional earth)
Damage to Property Caused by Electrostatic Discharge (ESD)!
Industrial ECO switch for DC operation: Power supply is provided via an external
direct-current power source. As the industrial ECO switch is not equipped with a
power switch, it switches on immediately when you apply the direct-current
power supply.
