WAGO-SPEEDWAY 767
Connecting Data and Supply Cables
45
767-4801/000-800 8DO 24V DC 0.5A IF (8xM8)
Manual
Version 1.1.0
Pos: 23.21 /Serie 767 ( WAGO-SPEED WAY)/Anschluss D aten- und Versorgungskabel/I/O-M odule/Anschluss_Aktoren 767- 4805_8xM 8 @ 16\mod_1375173132702_21.docx @ 127186 @ 2 @ 1
5.5
Connecting the Actuator Cable
The actuator cable provides power to the connected actuators and transmit the
actuator signals.
When using cables that have not been pre-assembled, make sure that these cables
are equipped with M8 plugs rated to IP67. The following table outlines the
assignment of the actuator connections:
Table 21: Connection assignment of digital outputs
Connection
Connection diagramm
OUT
OUT
X1, X3, X5, X7
X2, X4, X6, X8
Pos: 23.22 /Serie 767 ( WAGO-SPEED WAY)/Wichtige Erläuter ung en/Sicherheitshinweise/Achtung/Achtung: Höchste Strombel astbar keit der Vers.kontakte(Aktor en) @ 8\mod_1278305558285_21.docx @ 58898 @ @ 1
The highest current carrying capacity of the supply contacts is 4 A!
Consider that the actuators are supplied from the U
A
supply line. The actuators'
current consumption is to be taken into consideration when determining the
present current demand for the U
A
supply line.
Pos: 23.23 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
