765-4203/0100-0000
Functions
28
Product manual | Version: 1.0.0
4PORT IOL-A FLD EC DC 24V 2.0A
Index Subindex
Size
Name
Description
The number of “Output bytes” corresponds
to the length of the module used in slot “IO-
Link Port X02” and can be 1, 2, 4, 8, 16 or
32 bytes.
...
...
...
...
0x7030.01
1 byte
Output byte 0
Object 0x1603 with output data of port X04
IO-Link output data of the IO-Link device on
port X04. For a description of the data, see
the manual from the manufacture of the IO-
Link device used.
The number of “Output bytes” corresponds
to the length of the module used in slot “IO-
Link Port X04” and can be 1, 2, 4, 8, 16 or
32 bytes.
0x7030.02
1 byte
Output byte 1
...
...
...
0x7030.20
1 byte
Output byte 31
Objects 0x160x with port operating mode “digital output
The following table describes the assignment of output process data of ports X01 to X04
for the “digital output” port operating mode.
Table 27: Objects 0x160x: Assignment of the Digital Output
Index Subindex
Size
Name
Description
0x7000.01
1 byte
PD (C/Q pin 4)
Port X01 (pin 4) functions as digital output:
Object 0x1600 contains object 0x7000.01
and transfers the outputs data to the digital
output connected to port X01 (pin 4).
Bit 0 = 0: output off. Bit 0 = 1: output on.
0x7010.01
1 byte
PD (C/Q pin 4)
Port X02 (pin 4) functions as digital output:
Object 0x1601 contains object 0x7010.01
and transfers the outputs data to the digital
output connected to port X02 (pin 4).
Bit 0 = 0: output off. Bit 0 = 1: output on.
...
...
...
...
0x7073.01
1 byte
PD (C/Q pin 4)
Port X04 (pin 4) functions as digital output:
Object 0x1603 contains object 0x7030.01
and transfers the outputs data to the digital
output connected to port X04 (pin 4).
Bit 0 = 0: output off. Bit 0 = 1: output on.
Object 0x1610:
Object 0x1610 contains the digital outputs (pin 2) of all ports.
Table 28: Object 0x1610: Assignment of the Digital Outputs
Index Subindex
Size
Name
Description
0x3000.01
2 bytes
PD (I/Q pin 2)
The port and pin assignment of process
data depends on the process data layout
setting: pin-based or port-based. See the
following tables.
The process data of the digital outputs can be transferred on a port basis (the default) or
pin basis. The following tables show the port and pin assignment.
