28
Mounting
WAGO-I/O-SYSTEM 750
753-456 2 AI ±10 V DC, Differential inputs
Manual
Version 1.2.0
Pos: 26.6 /All e Seri en ( Allgemei ne Module)/Ü berschriften/Ebene 2/Geräte einfüg en und entfer nen - Ü berschrift 2 @ 3\mod_1231768483250_21.docx @ 25950 @ 2 @ 1
5.2
Inserting and Removing Devices
Pos: 26.7 /All e Seri en ( Allgemei ne Module)/Sicherheits- und sonstige Hi nweise/Achtung/Achtung: Arbeiten an Ger äten nur spannungsfr ei durchführ en! @ 6\mod_1256193963573_21.docx @ 43426 @ @ 1
Perform work on devices only if they are de-energized!
Working on energized devices can damage them. Therefore, turn off the power
supply before working on the devices.
Pos: 26.8 /Serie 750 (WAGO-I/O-SYST EM)/M ontieren/D emontieren/I/O-Modul einfüg en @ 3\mod_1231769726703_21.docx @ 25989 @ 3 @ 1
5.2.1
Inserting the I/O Module
1.
Position the I/O module so that the tongue and groove joints to the fieldbus
coupler/controller or to the previous or possibly subsequent I/O module are
engaged.
Figure 6: Insert I/O Module (Example)
2.
Press the I/O module into the assembly until the I/O module snaps into the
carrier rail.
Figure 7: Snap the I/O Module into Place (Example)
With the I/O module snapped in place, the electrical connections for the data
contacts and power jumper contacts (if any) to the fieldbus coupler/controller or to
the previous or possibly subsequent I/O module are established.
Pos: 26.9 /Dokumentation allgemei n/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1
